simple deformation

The stress and deformation under elastic-plastic behavior are given for the structure of combined thick cylinder, and the simple deformation on the influence of structural plastic limit load is discussed.

给出了组合厚壁圆筒结构在弹塑性状态下的应力及变形情况，并且论述了筒体变形对结构塑性极限荷载的影响。

Lastly, a simple thermal model is used to analyze the thermal expansibility of the exhaust pipe to know whether the deformation ratio exceed the allowable deformation.

最后，通过建立简化模型，对低压缸排汽管的热膨胀特性进行了研究，分析其在不同工作环境下的变形率是否超出整个结构许用变形的范围。

When the side surface is under simple shear load and has a tangential deformation, stress concentrations occur at the fixed end of yarns which are the main load-bearing bodies.

当模型的侧面受到简单剪切而产生切向变形时，在主承载纤维束的固定端产生应力集中。

A simple and easy formula is put forward for computing structural lateral displacement caused by axial deformation of framed column.

提出一个简单易用的公式，用来计算由框架柱轴向变形而引起的结构侧移。

To study the interface slip and deformation character, four simple supported specimens of full size have been performed, the load-slip curves, load-deflection curves are established through the experiment.

为研究其钢-砼交界面相对滑移及变形性能，通过4根足尺简支梁的试验研究，得到组合梁的荷载-滑移、荷载-挠度关系曲线。

The research into the optical axes fabrics of quartz shows the small circle girdle fabric resulting from early coaxial pure shere deformation and the progressive relationship of point maximum-large circle girdle-cross large circle girdle resulting from non-coaxial simple shear deformation.

研究了石英光轴的组构形式，证实存在：早期共轴纯剪变形的小圆环带组构和非共轴简单剪切变形中，呈递变关系的点极密大圆环带交叉大圆环带组构型式。

The method is simple and explicit in physical meaning and lays a foundation for finite element analysis, that the slip and shear deformation can be easily calculated by the matrix displacement method used widely.

该方法计算简单，物理意义明确，使薄壁组合箱梁界面滑移、剪切变形效应分析方法纳入广泛使用的矩阵位移法，为组合箱梁的有限元分析奠定基础。

It is obvious by strain measure, petrofabric analysis, shear displacement amount counting and isotopic dating that ① the ductile shear zone's deformation belongs to plane simple-shear strain, and later the deformation translates into extensional strain.

应变测量、岩组分析、剪切位移量计算、同位素测年等定量分析表明：①以平面单剪应变为主，稍晚向伸长应变转化；

This paper makes simple force and its deformation analyses for the thin walled cylinder under axial compression at first.

本文首先对轴压薄壁圆筒作出简单的力及其变形分析。

The simple bounding surface elastoplastic-viscoplastic model was used in Biot' consolidation theory. The deformation and pore pressure of road soft clay improved by heaped load precompression was calculated numerically.

在Biot固结理论中使用简化的边界面弹塑/粘塑性模型，对超载预压法处理公路软基全过程的变形和孔压进行数值计算。

Based on the structural analysis of a major diametrical thin-wall cylinder according to the principle of simple deformation in mechanics of materials, a small torque sensor for testing automotive steering gear is designed and made.

利用材料力学中的简单变形原理，对大直径薄壁圆筒进行了结构分析。设计制造了用于汽车转向器试验的小扭矩传感器。